NEWS

Industry News


2023-06


The melting point of rubber tires The rubber used in tire manufacturing has a fixed melting point

Can rubber tires be carbonized when heated Yes Rubber itself has no melting point, and when it reaches a certain high slag temperature, it cracks (carbonizes). This is an inherent characteristic of rubber elastomers. When using a candle to bake a tire, the area where it is baked will definitely become carbon stained. It can also produce harmful gases to the human body. What is the melting point temperature of the tire The melting point temperature of the tire is between 90 and 110 degrees Celsius. The tire temperature is determined by driving conditions and weather conditions. It is normal to maintain a tire pressure between 2.4kg and 2.6kg, and it is recommended to check the tire pressure once a week. In summer, the road surface temperature often exceeds 70. When a car is driven for a long time in the hot summer, damaged or weak tires are prone to bursting due to high tire pressure. Affected by temperature, the air inside the tires will automatically expand, and the tire pressure will increase from 2.3kg to over 3kg. To ensure tire pressure, it is recommended to charge nitrogen gas in summer, and the inflation pressure should be reduced by 10%. Pay attention to tire wear: Tire tread wear and tear can cause the tire to lose grip, affect handling, easily blow out, and also cause the tire to lose its function of sewage and drainage. Car owners should regularly check the wear and tear of their tires. If it is found that the wear level has exceeded the tire wear marks, it indicates that the tire is in danger and must be replaced immediately. What is the melting point of rubber Rubber is an elastic material with no melting point. No matter how high the temperature is, it will crack. Physical properties of rubber: (1) Generally, it is a sheet-like solid with a relative density of 0.94, a refractive index of 1.522, an elastic modulus of 2-4 MPa, softening at 130-140 ℃, bonding at 150-160 ℃, and degradation at 200 ℃. (2) It has high elasticity and plasticity at room temperature, and crystal hardening at low temperature. Good alkali resistance, but not strong acid resistance. Insoluble in water, low ketone and alcohol, it expands in non-polar solvents such as chloroform and carbon tetrachloride. (3) Natural rubber has excellent mechanical strength, low hysteresis loss, and low heat generation during multiple deformations. Therefore, its flexibility is also good, and due to its non-polar nature, its electrical insulation performance is good.


2018-12


Scope and advantages of O-ring application

The O-ring seal is suitable for installation on various mechanical equipment, serving as a seal under specified temperature, pressure, and different liquid and gas media, whether in a stationary or moving state. Various types of sealing components are widely used in machine tools, ships, automobiles, aerospace equipment, metallurgical machinery, chemical machinery, engineering machinery, construction machinery, mining machinery, petroleum machinery, plastic machinery, agricultural machinery, and various instruments and meters. The O-ring is mainly used for static sealing and reciprocating motion sealing. Low speed rotary sealing device used for rotary motion sealing. The O-ring is generally installed in a groove with a rectangular cross-section on the outer or inner circle to serve as a seal. The O-ring still plays a good sealing and shock absorption role in environments such as oil resistance, acid and alkali resistance, abrasion, and chemical erosion. Therefore, the O-ring is the most widely used seal in hydraulic and pneumatic transmission systems. Compared with other types of sealing rings, the O-ring has the following advantages: --Suitable for various sealing forms: static sealing, dynamic sealing --Suitable for various purposes of materials, with standardized dimensions and grooves, and strong interchangeability --Suitable for various types of motion: rotary motion, axial reciprocating motion, or combined motion (such as rotary reciprocating combined motion) --Suitable for various sealing media: oil, water, gas, chemical media, or other mixed media. By selecting appropriate rubber materials and designing appropriate formulas, effective sealing effects on oil, water, air, gas, and various chemical media can be achieved. The temperature range is wide (-60 ℃~+220 ℃), and the pressure can reach 1500Kg/cm2 when fixed for use (combined with the reinforcing ring). --Simple design, compact structure, and convenient assembly and disassembly The O-ring has a simple cross-sectional structure and a self sealing effect, ensuring reliable sealing performance. Due to the simple structure and standardized installation of the O-ring itself and its installation location, installation and replacement are very easy. --Materials include: Nitrile rubber, FKM, VMQ, Ethylene propylene rubber, CR, Butyl rubber, PTFE, NR, etc --Low cost --The dynamic friction resistance is relatively small


< 1 >