NEWS

Company News


2023-06


Method for removing odor from rubber sealing strips

During the processing or use of rubber sealing strips, acids, alkoxy compounds, aldehydes, ethylene compounds, ammonia, etc. may be generated. If inhaled for a long time, their odors can stimulate the senses, cause discomfort or even harm the body, or cause secondary pollution to the environment. What methods can be used to reduce the release of odors from rubber sealing strips? In daily life, we are often troubled by the odor emitted by rubber sealing strips, including the low odor of rubber strips in the production environment or storage. In fact, there are always many tricks in life. Take a look at the following methods to deal with the odor of rubber sealing strips, which may also be useful to you! At the same time, it is also necessary to ensure that the usability and quality level of the rubber strips are not reduced, and to achieve cleanliness and environmental protection has become the goal that every rubber sealing strip manufacturer strives for. There are complex and simple methods for removing odors in general rubber products, as follows: 1. The essence method is generally used to add some spices to degrade or reduce the acid, alkoxy compounds and other odors produced during the processing or use of various rubbers. The method is effective, but it cannot fundamentally solve the problem. 2. The method of boiling with water to remove odors has a long history, appearing in the late 1980s. Some workshop style factories are now using this method (boiling the produced rubber products in boiling water). This method can remove a small portion of odors, but the majority cannot be removed and cannot be root removed. After a period of time, the flavor continues to precipitate and evaporate. The water boiling deodorization method has high labor costs, cumbersome processes, and cannot last for a long time. The deodorization effect is average. 3. Waterborne deodorants are mainly oil-based water-based agents that neutralize rubber raw materials to reduce the odor of rubber products. This method cannot remove the root and has timeliness, usually maintained within about a month. 4. Wipe with hydrogen peroxide or soak rubber products thoroughly, then take them out and air dry to remove odors. 5. Put waste tea leaves into rubber products because they have the ability to absorb odors. 6. Soak in salt water for half an hour and then dry it. 7. Take the rubber products to an open and ventilated place for drying, and after a period of time, they will be removed by themselves. This method is very simple and is also a relatively natural way to remove odors. Alternatively, using bamboo charcoal can also remove odors.


< 1 >