NEWS

NEWS


2023-06


Method for removing odor from rubber sealing strips

During the processing or use of rubber sealing strips, acids, alkoxy compounds, aldehydes, ethylene compounds, ammonia, etc. may be generated. If inhaled for a long time, their odors can stimulate the senses, cause discomfort or even harm the body, or cause secondary pollution to the environment. What methods can be used to reduce the release of odors from rubber sealing strips? In daily life, we are often troubled by the odor emitted by rubber sealing strips, including the low odor of rubber strips in the production environment or storage. In fact, there are always many tricks in life. Take a look at the following methods to deal with the odor of rubber sealing strips, which may also be useful to you! At the same time, it is also necessary to ensure that the usability and quality level of the rubber strips are not reduced, and to achieve cleanliness and environmental protection has become the goal that every rubber sealing strip manufacturer strives for. There are complex and simple methods for removing odors in general rubber products, as follows: 1. The essence method is generally used to add some spices to degrade or reduce the acid, alkoxy compounds and other odors produced during the processing or use of various rubbers. The method is effective, but it cannot fundamentally solve the problem. 2. The method of boiling with water to remove odors has a long history, appearing in the late 1980s. Some workshop style factories are now using this method (boiling the produced rubber products in boiling water). This method can remove a small portion of odors, but the majority cannot be removed and cannot be root removed. After a period of time, the flavor continues to precipitate and evaporate. The water boiling deodorization method has high labor costs, cumbersome processes, and cannot last for a long time. The deodorization effect is average. 3. Waterborne deodorants are mainly oil-based water-based agents that neutralize rubber raw materials to reduce the odor of rubber products. This method cannot remove the root and has timeliness, usually maintained within about a month. 4. Wipe with hydrogen peroxide or soak rubber products thoroughly, then take them out and air dry to remove odors. 5. Put waste tea leaves into rubber products because they have the ability to absorb odors. 6. Soak in salt water for half an hour and then dry it. 7. Take the rubber products to an open and ventilated place for drying, and after a period of time, they will be removed by themselves. This method is very simple and is also a relatively natural way to remove odors. Alternatively, using bamboo charcoal can also remove odors.


2023-06


The melting point of rubber tires The rubber used in tire manufacturing has a fixed melting point

Can rubber tires be carbonized when heated Yes Rubber itself has no melting point, and when it reaches a certain high slag temperature, it cracks (carbonizes). This is an inherent characteristic of rubber elastomers. When using a candle to bake a tire, the area where it is baked will definitely become carbon stained. It can also produce harmful gases to the human body. What is the melting point temperature of the tire The melting point temperature of the tire is between 90 and 110 degrees Celsius. The tire temperature is determined by driving conditions and weather conditions. It is normal to maintain a tire pressure between 2.4kg and 2.6kg, and it is recommended to check the tire pressure once a week. In summer, the road surface temperature often exceeds 70. When a car is driven for a long time in the hot summer, damaged or weak tires are prone to bursting due to high tire pressure. Affected by temperature, the air inside the tires will automatically expand, and the tire pressure will increase from 2.3kg to over 3kg. To ensure tire pressure, it is recommended to charge nitrogen gas in summer, and the inflation pressure should be reduced by 10%. Pay attention to tire wear: Tire tread wear and tear can cause the tire to lose grip, affect handling, easily blow out, and also cause the tire to lose its function of sewage and drainage. Car owners should regularly check the wear and tear of their tires. If it is found that the wear level has exceeded the tire wear marks, it indicates that the tire is in danger and must be replaced immediately. What is the melting point of rubber Rubber is an elastic material with no melting point. No matter how high the temperature is, it will crack. Physical properties of rubber: (1) Generally, it is a sheet-like solid with a relative density of 0.94, a refractive index of 1.522, an elastic modulus of 2-4 MPa, softening at 130-140 ℃, bonding at 150-160 ℃, and degradation at 200 ℃. (2) It has high elasticity and plasticity at room temperature, and crystal hardening at low temperature. Good alkali resistance, but not strong acid resistance. Insoluble in water, low ketone and alcohol, it expands in non-polar solvents such as chloroform and carbon tetrachloride. (3) Natural rubber has excellent mechanical strength, low hysteresis loss, and low heat generation during multiple deformations. Therefore, its flexibility is also good, and due to its non-polar nature, its electrical insulation performance is good.


< 12 >